DIY No Sew Halloween BOO Fabric Tie Wreath

DIY No Sew Halloween BOO Fabric Tie Wreath

We are back with another super fun project this month. This DIY No Sew Halloween BOO Fabric Tie Wreath looks so amazing on in our home that the kids are already wanting to make another one for their room doors. How cute is that? We were able to get all of the supplies from Walmart but I linked to several dupes on Amazon as well. We are thrilled with the way that it turned out. We hope that you love this DIY No Sew Halloween BOO Fabric Tie Wreath as much as we do!

DIY No Sew Halloween BOO Fabric Tie Wreath

Supplies

• 3 different types of material: Pumpkins fabric, Orange with black polka dots fabric, Candy corn fabric
• 3 different colors of ribbon: 1-1/2 black ribbon, 7/8 white ribbon, 7/8 white ribbon
• Glitter Paint in White Opal
• Glitter Paint in Black Opal
• High Gloss Paint in Tangerine
• High Gloss Paint in Ink
• 12″ wire wreath form
• BOO letters – Wood 5″ Classic Letters: B & BOO letters – Wood 5″ Classic Letters: B
• BOO letters – Wood 5″ Classic Letters: B
• Scissors
• Ruler
• Paint brush
• Hot Glue gun–high temp (not low temp) hot glue guns work best for this project
• Tacky glue

Directions:

1. I like to paint all of my items so they can dry while I work on the rest. Paint 1 orange snake with Glitter Paint in White Opal. Let dry. Paint 2 black snakes with Glitter paint in Black Opal. Let dry. Add orange accents to 1 black snake using High Gloss paint in Tangerine. Let dry. Add black dots to the orange snake using High Gloss Paint in Ink.
2. Paint the BOO blocks using High Gloss Paint in Ink. Let Dry. Add a coat of Waverly Glitter Paint in Black Opal. Let dry.
3. Cut your fabric for the wreath. Using a ruler or tape measure, keep your material folded in half and measure 6″ on each end. Add a mark with a pencil at 6″ or simply cut each end to denote 6″. Cut the fabric so you have a 6″ x 22″ piece when folded in half.
4. Lay your measuring tape onto the piece you just cut. Cut into the fabric at 1″ increments. Remove the tape measure and continue to cut through the entire piece of fabric. Your cuts do not have to be perfect. They can be irregular or slightly off. Perfection is not necessary here.
5. Repeat until you have done this at least 3 times to each color of fabric (giving you about 132 pieces of each color).
6. Begin to tie your fabric onto the wire frame. The wire frame has four wires. Tie the fabric onto the outer three pieces of wire. You can certainly tire the fabric onto all four sections, but you will need to cut more fabric if you choose to do so.
7. To tie, simply fold the fabric in half and tie a knot. Randomly attach colors or create your own pattern. I did not use a pattern. I just grabbed and tied. After you tie, slide your pieces together so they are tight.
8. Continue to tie your fabric onto the frame until the entire frame is covered. Fluff fabric as desired.
9. Cut 3 pieces of ribbon, 24″ in length. Line up the three pieces of ribbon, from largest to smallest, and attach together with hot glue. Fold the ribbon in half and attach to the empty wire frame (the inside circle one) and affix hot glue at the ends.
10. Lay your wreath flat on a table and attach your BOO letters as desired. Use hot glue to affix the letters to the fabric and add hot glue where the letters overlap. Let set to dry.
11. Use hot glue to affix the snake accents placing the orange snake onto the B letter, the orange and black snake onto the ribbon and tuck the black snake into the frame adding a dollop of hot glue so it sticks.
12. Hang as desired.

We hope that you are inspired by this DIY No Sew Halloween BOO Fabric Tie Wreath. Happy crafting and Happy Halloween!